A Closer Look at a Customised Chemical Spill Kit
Standard kits are a starting point. See the full contents of one customised chemical spill kit — and the cleaning tools its buyer added — laid out before packing.

A spill kit is a pre-packed set of absorbents, protective gear and disposal bags kept at the point where liquids are handled, so the first minutes of a spill are spent cleaning up instead of searching for materials. Most buyers start from a standard size — but the kits that work hardest are often the ones whose contents were adjusted before they shipped. The photograph above shows one such customised chemical spill kit laid out in full before packing.

What Does a Standard Chemical Spill Kit Contain?
A standard chemical kit is built around yellow, chemical-resistant absorbents. Our 50L Chemical Spill Kit, for example, packs 40 absorbent pads (40 × 50 cm), 2 absorbent socks, 2 absorbent pillows, 3 hazardous waste disposal bags with ties, a pair of protective gloves, a pair of safety goggles and an emergency response guide, all in a 50 × 40 × 25 cm carry bag. The bag itself is printed with three tick boxes — Oil Only, Chemical, Universal — and marked for the absorbent type inside.
What Was Changed in This Kit?
The absorbent core of this customised kit matches the standard pattern: a stack of yellow chemical absorbent pads, three yellow absorbent socks, two yellow absorbent pillows, gloves, goggles, a printed hazardous waste bag and the spill kit instruction sheet, with the carry bag's Chemical box ticked.
Around that core, the buyer added the tools their own clean-up routine actually uses: a dustpan and brush set for sweeping up absorbed residue, a spray bottle for the cleaning solution their site works with, and a pack of blue wipes for finishing surfaces and equipment. None of these replace the absorbents — they close the gaps that a standard list cannot know about: how the site cleans after the absorbent has done its work.
Why Do Buyers Customise Spill Kits?
Because no two spill points are the same. A filling station needs socks long enough to ring the equipment; a laboratory bench needs smaller pads and more gloves; a workshop that sweeps up after absorbing wants the dustpan inside the kit, not in a cupboard down the corridor. Adjusting the contents costs little at packing time and saves the kit from sitting half-used because one everyday item was missing.
Common adjustments include swapping pad weights, adding extra socks or pillows, including cleaning tools and wipes, and printing the bag with the buyer's own label.

How Do You Order a Customised Kit?
Start from the closest standard size — 20L, 50L, 120L or 660L, in Oil Only, Chemical or Universal absorbents — then tell us what to add, remove or swap. Chengdu Anwill Technology Co., Ltd. (Anwill) packs spill kits to order and supplies distributors and end users in over 40 countries.
Request a Quote — via the contact page (/contact) or [email protected], and list the contents you want in your kit.