Cases
Inside Our Factory: How Anwill Oil Absorbent Pads Are Made
A look inside the Anwill factory at how melt-blown polypropylene becomes the oil absorbent pads used in spill kits and industrial sites worldwide.

When a carton of oil absorbent pads arrives at your site, it looks simple: neat white pads, stacked and ready to use. But before they reach you, each pad has been through a full production process in our own factory in China — from melt-blown fibre to a finished, packed carton. Here is a look at how it happens.

It Starts with Melt-Blown Polypropylene
Oil absorbent pads are made from melt-blown polypropylene nonwoven. On our production lines, polypropylene is melted and blown into very fine fibres, which are laid down at random to form a soft, lofty sheet. That random fibre structure is what gives the material its absorbency: it creates a large surface area that soaks up oil quickly, while the polypropylene itself repels water. So a pad dropped on an oily puddle picks up the oil and leaves the water behind.
We produce this melt-blown material in our own factory, which means we control the fibre weight, thickness and uniformity from the start — rather than buying finished sheets from a third party and hoping they are consistent.
From Wide Rolls to Finished Pads
The nonwoven comes off the production line as wide rolls. Those rolls are then slit and cut into pads on our cutting lines. Our standard oil pad size is 40 x 50 cm, and we make them in three weights:
- 100 gsm — thin (about 1 mm), for light drips and wiping, 400 pads per carton
- 200 gsm — medium (about 2 mm), the everyday workhorse for most spills, 200 pads per carton
- 400 gsm — thick (about 4 mm), for heavier spills, 100 pads per carton
The pads are perforated so they can be torn to size on site, and every batch is checked for weight, thickness and appearance before it moves to packing. Pads that do not meet the specification do not ship.

The same production line also makes our other absorbent formats — Universal Absorbent Pads 200gsm in grey for mixed spills, Chemical Absorbent Pads 200gsm in yellow for aggressive liquids, and pink hazmat pads — as well as absorbent rolls, socks and booms, all from the same melt-blown base.
Packing for Export
Finished pads are counted, stacked and packed into export cartons (52 x 42 x 40 cm), labelled and palletised in our warehouse. Because we make the material ourselves, we can also cut custom sizes, adjust the weight, or produce pads under your own brand and packaging — just ask.

From the production floor to the shipping pallet, every step happens under one roof. That is why we can keep quality consistent from carton to carton, and why we can deliver large orders on a short lead time.
Why It Matters for Your Spill Response
For a buyer, where a pad is made matters. A pad from a factory that controls its own melt-blown production will absorb consistently, batch after batch — no thin spots, no weak pads that fall apart when wet. And when you need 20 cartons or 2,000, factory-direct supply keeps the price and the delivery time honest.
If you use oil absorbent pads in your workshop, warehouse, or field operations, take a look at our range:
- Oil Absorbent Pads 200gsm (https://www.anwillspillcontrol.com/products/oil-absorbent-pads-200gsm) — available in 100, 200 and 400 gsm
- Oil Absorbent Rolls (https://www.anwillspillcontrol.com/products/oil-absorbent-rolls)
- Oil Absorbent Socks (https://www.anwillspillcontrol.com/products/oil-absorbent-socks)
Request a Quote
Need oil absorbent pads in a specific size, weight or quantity? Contact us for a quotation — [email protected] — or send your enquiry through our contact form (https://www.anwillspillcontrol.com/contact).