




Drain Plugs
Polyurethane Drain Plug 4in (DPG-4)
Tapered polyurethane drain plug for 4 inch drain openings — friction-fit seal with an 8 inch top holder for gloved handling; top Ø 114.3 mm, bottom Ø 89 mm.
Specifications
- Item No.
- DPG-4
- Fits Drain
- 4 in
- Top Diameter
- 114.3 mm (4.5 in)
- Bottom Diameter
- 89 mm (3.5 in)
- Height
- 120.7 mm (4.7 in)
- Material
- Polyurethane
- Colour
- Yellow
- Weight
- 1.20 kg
For larger 4 inch drain openings, the DPG-4 Drain Plug provides the same fast, reliable seal in a bigger format. The tapered body — 114.3 mm across the top, narrowing to 89 mm — wedges firmly into the pipe and blocks the drain, keeping spilled liquids inside your containment system during transfers, maintenance and clean-up.
The polyurethane construction is flexible for a tight fit and durable for years of repeated use, with the chemical resistance industrial sites need. The 1 inch bottom screw ring secures the plug's position, and the extended 8 inch top holder lets operators install and pull the plug quickly, even in gloves. High-visibility yellow makes the sealed drain obvious at a glance during inspections.
Rinse with soap and water after an incident and the DPG-4 is ready to go again. Confirm your drain dimensions before ordering to ensure the taper matches your opening.
Other Sizes and Related Products
- Drain Covers — flat sealing mats for surface drains