





Flood Bags
Water Active Flood Bags 30 × 60 cm
Water-activated flood bags, 30 × 60 cm — the sandless sandbag. Made from non-woven fabric with a super-absorbent polymer core, they grow to approx. 8 cm high in 10 minutes or less. Stack them in a brick pattern to build a flood wall — no sand, no filling, no labour.
Specifications
- Material
- Non-woven fabric, super-absorbent polymer core
- Size
- 30 × 60 cm
- Colour
- Black
- Expanded Height
- Approx. 8 cm
- Activation Time
- 10 minutes or less in water
- Packaging
- Flat-packed
Sandbags work, but they are slow: somebody has to find sand, fill each bag, carry it and stack it — and then shovel the wet sand away afterwards. Water Active Flood Bags do the same job without any of that. They are flat, light bags of super-absorbent polymer. Just get them wet and they swell into a solid barrier in 10 minutes or less.
Each bag grows to 30 × 60 cm and about 8 cm high. Lay them in a row to protect a doorway, or stack them in a brick pattern to build a wall.
Key Features
- Just get them wet. No sand, no filling, no labour — activate with a hose or bucket, or lay them dry and let the floodwater activate them.
- Grows fast. Reaches full size — 30 × 60 cm, approx. 8 cm high — in 10 minutes or less.
- Absorbent core. The super-absorbent polymer core turns the water into a gel held inside the fabric.
- Stacks into a wall. Lay bags in a brick pattern; for taller walls, widen the base like a pyramid so the wall stays stable.
- Light and compact before use. Flat-packed and easy to store until needed; one person can carry a stack of bags.
- No sand, no mess. Nothing to fill or clean up afterwards.
- Reusable after drying — can be used again for the next flood.
- Non-toxic. Safe to handle, with no harmful chemicals.
- Custom sizes, logo and packaging available on request.
Specifications
- Size: 30 × 60 cm
- Expanded height: approx. 8 cm
- Activation time: 10 minutes or less in water
- Material: non-woven fabric, super-absorbent polymer core
- Colour: black
- Packaging: flat-packed.
Note: for fresh water only — not for use with salt water.
Applications
- Doorways and entryways — the most common place floodwater gets in
- Garage thresholds — keep vehicles and stored goods dry
- Window wells and basement entrances — divert water away from below-ground openings
- Building a flood wall — stack bags to protect a longer frontage or a low wall
- Around drains and low points — contain and divert water where it collects
How to Use
- Activate the bags — soak them in a bucket or wheelbarrow, spray them with a hose, or lay them dry and let the floodwater activate them.
- Place them in position across the opening, pressing them together so there are no gaps.
- Stack for height — lay rows in a brick pattern, staggering the joints; widen the base like a pyramid for taller walls.
For longer openings, see the Water Active Flood Barrier 1.5m and Water Active Flood Barrier 3m — single tubes that cover a doorway or a warehouse entrance in one piece.
Request a Quote
A case of flood bags on the shelf is the cheapest flood insurance a home or business can buy. Contact us for a quotation or email [email protected]. Anwill has manufactured spill control and flood protection products in China since 2009, serving customers in over 40 countries.