2-install-doorway
3-closeup-asphalt
5-threshold
1-activation-hose-cropped
1.5m Flood Barrier

Water Active Flood Barrier 1.5m

Water-activated flood barrier, 15 cm × 1.5 m, sized for standard doorways and garages. It absorbs up to approx. 22–30 litres of water and expands to Ø8–10 cm in 10 minutes or less — no sand, no heavy lifting, no mess. A fast, clean sandbag alternative for homes and businesses.

Specifications

Material
Non-woven fabric, super-absorbent polymer core
Size
15 cm × 1.5 m
Colour
Black
Expanded Height
Ø8–10 cm
Activation Time
5–10 minutes in water
Packaging
Vacuum-compressed pack
Water Absorption
Up to 15–20 L per metre
Dry Weight
Approx. 0.3–0.6 kg per metre
When floodwater heads for your front door, you need a barrier up in minutes, not hours. The Water Active Flood Barrier 1.5m is made for exactly that job: one person takes it out of its vacuum-compressed pack, lays it across a standard doorway or garage entrance, and lets the water do the rest.
The barrier is a flat tube of black non-woven fabric with a super-absorbent polymer core. On contact with water it swells to Ø8–10 cm in 10 minutes or less, forming a solid dam that blocks and diverts the water. A built-in anti-roll wedge keeps it in place as it expands, so it stays where you put it.

Key Features

  • Self-activating — just add water. The barrier expands Ø8–10 cm in 10 minutes or less when exposed to water, or pre-soak it with a hose before the water arrives.
  • Sized for standard doorways. At 1.5 m long it covers a single doorway or garage entrance in one piece — no joining, no gaps.
  • Built-in anti-roll wedge. The wedge and mini channel hold the barrier in place as it swells, so it will not roll away under water pressure.
  • Light and compact before use. Stored vacuum-compressed, it takes up little shelf space and one person can carry it to the doorway.
  • No sand, no mess. Nothing to fill, shovel or clean up afterwards — a clean alternative to traditional sandbags.
  • Reusable after drying — can be used again for the next flood.
  • Non-toxic. Safe to handle, with no harmful chemicals.
  • Custom sizes, logo and packaging available on request.

Specifications

  • Size: 15 cm × 1.5 m
  • Expanded height: Ø8–10 cm
  • Activation time: 5–10 minutes in water
  • Material: non-woven fabric, super-absorbent polymer core
  • Colour: black
  • Absorbs: up to approx. 22–30 litres per barrier (up to 15–20 litres per metre)
  • Dry weight: approx. 0.45–0.9 kg
  • Packaging: vacuum-compressed pack



Applications

  • Doorways — the most common entry point for floodwater in homes and small businesses
  • Garage entrances — keep vehicles, tools and stored goods dry
  • Basement bulkheads — bend the barrier around the opening to stop water running down
  • Drains and low points — divert water away from a vulnerable area



How to Use

  1. Take it out of the vacuum pack and carry it to the opening.
  1. Lay it across the opening, on the water side of the doorway, with the wedge facing away from the water.
  1. Let the water activate it — or pre-soak it with a hose. It reaches full height in about 5–10 minutes.


Need a longer run? See the Water Active Flood Barrier 3m for wider entrances and warehouses. For building a wall or protecting a longer stretch, see the Water Active Flood Bags 30 × 60 cm.
This size is part of the Water Active Flood Barrier range — see the main page for the full range, flood bags and custom sizes.

Request a Quote

Flood season does not wait. Keep a barrier by the door before the rain arrives — it costs far less than cleaning up after a flood. Contact us for a quotation or email [email protected]. Anwill has manufactured spill control and flood protection products in China since 2009, serving customers in over 40 countries.